<

A luxury watch is something you should be proud of and a prized possession that you want to wear wherever you go. Hence, it is important to make sure that the treasured timepiece you buy is water resistant to avoid expensive watch repair Edmonton, and to know what to do when the worst happens.
The biggest clue that your watch has been compromised by water is condensation. If you look at your watch and find a fogginess or a few droplets of moisture inside, then this is a clear sign that it has been damaged by water.

There are lots of rumors and myths making the rounds for what you can do if your watch has been exposed to water. One of them is putting it on the radiator or placing it in a bag of uncooked rice for 6 to 10 hours. This heat will remove the moisture from the movement and cause the water inside the watch to dry faster and the rice will absorb moisture. However, we suggest you seek expert help, such as On Time Service Corp. who have the experience with watch repair in Edmonton to ensure that all parts of your watch are dry and free of corrosion.  And if your watch had a water-resistant seal that failed, we can replace the seal to protect it against future moisture damage.

Prevention is the Best Method

If water gets into your watch, the consequences can be devastating, including the cost of repair, as all important components, such as hands, movement, and dial can corrode, affecting its performance.

So, it is best to take precautions and guarantee that your watch is water resistant; small things, such as checking for any cracks or chips in the crystal, ensuring the back is firmly in place, and that the crown is properly screwed into place. These are all effective checks when it comes to taking care of your watch and keeping it from being vulnerable to moisture. As well, a careful pressure test will provide additional protection against water damage.

At On Time Service Corp, we offer an air pressure testing service which enables us to check that your watch is still water resistant. This can be done on the spot and takes around 10 minutes.

If any mishap happens and your watch does sustain water damage, then you’ll need to get assistance from professionals. They’ll expertly clean and dry every piece of your watch remove any particles which may have collected inside the watch, and repair all parts that have been damaged by moisture. Contact them for watch repair in Edmonton and any other area of Canada and save your watch from water damage.

Like any well-maintained car, your watch will also need occasional maintenance service. Do you wear a vintage watch, and are wondering how often it needs to be serviced? According to watch industry experts, you should have watch maintenance services done about every three to five years. In the case of watches, even the smallest damage can balloon to become more severe. Ultimately, your watch may become unusable, or you may need to spend much more on its repair. On-time Service Corp. offers you the best watch maintenance services in Winnipeg to keep your watch in working order. The need for watch repair depends on how frequently you wear that watch and how it is stored when it is off the wrist. Fine watches are like fine automobiles, which require maintenance and repair from time to time. This will help your watch to run for a longer time.

Luxury watches, such as Rolex or Patek Philippe, should be serviced within 4 to 5 years of purchase. Watch maintenance services in Winnipeg can help them retain their value and accuracy. Stay on top of watch maintenance to keep your watch in top condition. You can also prevent your watch from being damaged by taking care of it on a daily basis.

How can you prevent your watch from being damaged?

There are some simple tips you can follow to care for your watch and prevent it from being damaged:

  • Cleaning your watch regularly keeps dirt from building up. You can clean the watch with a soft, damp cloth to remove dust and dirt. Make sure you do not rub too hard as it will cause wear to the finish of your watch over time.
  • If you wear your luxury watches or any other watch only occasionally, then keep it in a safe spot to prevent damage. You should keep it in a closed watch box to protect it from dirt and moisture in the air.
  • You will be surprised to know that you can easily maintain a watch just by wearing it. Yes, this is true! Wearing a watch will help to keep all its mechanical parts in working condition, preventing any corrosion from damaging them.

These are just a few DIY ways you can prevent damage to your watches.  Care for them carefully and have watch maintenance done every few years to ensure a long life for your precious timepieces.

Maybe it belonged to a loved one, maybe it has sentimental value, or perhaps it was a gift given in celebration of a special occasion; whatever the reason, we often form an emotional attachment to watches. And as we care for these pieces so much, we want them to look and function like new for as long as possible.

 

Watches are one of the few accessories that are worn daily, and that means that damage and wear are bound to occur. Damage to the face of your watch, in particular, may seem like a desperate situation. Thankfully, there are very few situations that are hopeless, if you have the right help. Whether you own a timepiece that has simply stopped keeping time and needs watch battery replacement, or your watch requires a complete overhaul, an experienced watchmaker can make it right.

 

The face of your watch is arguably the most important part of your watch, if you like telling time. Exposure and wear can cause the dial of your watch to fade, and accidents resulting in damage can happen. Watch dial repair services can refinish an existing dial, making the original dial look new, or in cases where it is required, replace the dial with a manufacturer’s replacement or closely matching option. Conversely, dial repair services are also your chance to take something old and give it a brand new face. Dials are available in custom colour options and in dozens of different finishes, textures, and treatments.

 

A broken face can often lead to damaged watch hands. However this type of impairment is almost always repairable when the repairs are undertaken by an experienced professional. A watchmaker can refinish the original hands or replace damaged hands with manufacturer or custom replacements. And just as there colour options for your watch dial, there are colour, size, and style options available for watch hands, if you are looking to change or update your timepiece.

 

Sometimes the damage from the face goes deeper than the surface. The mechanics that run your watch are intricately tied together and one small piece out of balance can throw the entire movement off. The answer may be as simple as a watch battery replacement for quartz watches, but other times you may require complete watch movement services to locate and resolve the problem. In either case, problems with watch movements should only be addressed by a professional watchmaker.

Luxury watches are built and designed to last not only your lifetime, but for generations after. However, due to the intricate nature of the internal mechanisms, caring for a luxury watch comes with its own unique challenges. However, with a little extra care, attention, and watch maintenance services, your investment will pay off for years to come.

Unlike fashion watches, luxury watches are an investment, and as an investment they require time and monetary outlays, and occasional watch maintenance services to keep them in top working order. With these tips, your luxury watch will be able to last.

Refrain From Excessive Water Exposure

Some luxury watches are waterproof, however, unless your watch specifically states that it is ISO 6425 or is rated 30 bars or more, you really should avoid getting it wet. Even watches that have an indicated water resistance that may include the depth of your pool, or a quick shower, avoiding moisture is still the best way to ensure the longevity of your timepiece.

Store in a Cool, Dry, Dark Place

Your nightstand is a fine place for a book and your cell phone charger; however it shouldn’t be used as a storage place for your luxury watches. Watches should be stored flat, in a cool location, away from direct sunlight. Excessive exposure to heat and sunlight can accelerate the deterioration of your watch, dry up the lubrication required to keep the internal mechanics moving, and prevent moisture or fog from building up underneath the face.

Be Careful With the Crown

Both automatic and manual watches require winding; however there is a way, a time, and a place to correctly wind your watch. A watch should never be wound while it is being worn, to do so run the risk of bending or breaking the crown. Never wind the watch more than you are able to without resistance, as soon as you feel resistance, which will be obvious, stop winding immediately. And finally, there is a “danger zone” typically between 9 pm and 3 am, where date enabled watches should not be adjusted, doing so may result in damage to the internal gears.

Clean and maintain it regularly

Even with gentle wear, your luxury watches should be frequently cleaned and be taken in for regular watch maintenance services. To clean your watch, use a small amount of water, a mild soap, and a soft cloth to wipe around the face and surfaces of your watch. If possible, remove the band and clean separately. Metal link bands can be submerged in water, while leather bands are best left dry, or wiped with a very small amount of soapy water and left to dry flat. For severely tarnished watches, professional cleaning is highly recommended.

 

Many people wear their watches 365 days a year, keeping them on time for all the important moments in life. Watches come in all shapes and sizes and each person has their own preferred style. Whether you prefer an automatic mechanical watch, a quartz movement watch, a chronograph watch, or even a pocket watch, it is important to make time for watch maintenance and repair. Each type of watch has its own needs, depending on the type; however, there are a few common maintenance items that all watches require.

Over time, watches can become dirty, worn from wear and tear, and require some watch maintenance and repair to ensure optimal performance and a lasting life span.

It has been suggested that in order for a watch to run smoothly and at its best, it should be taken in to a jeweler or watch specialist for a watch maintenance and repair visit every three to five years.

During a maintenance service

During your service, the watch specialist will perform full diagnostics, reviewing all the features of your watch. Your watch will be expertly dismantled and each part will be cleaned, often using an ultrasonic bath for the larger components and manual washing for the most delicate pieces.

Once the watch has been diagnosed and cleaned, the watch specialist will reassemble your watch, and apply a lubricant to make sure that your watch is able to keep ticking away smoothly. After lubrication, the specialist will replace any seals that may require maintenance to improve weather resistance.

Finally, your favorite old watch will be quality checked to ensure that it is working like new again.

Repair the little issues sooner

If your watch is not at the point where it is in need of a full maintenance, but you have noticed that the band is a bit worn, it is running a bit slow (or fast), or the battery has died, a quick trip to a local watch service shop can have it fixed up in no time. By taking your watch in to repair the minor issues, it can keep it running for the long term.

Scheduling time for watch maintenance and repairs allows you to keep your watch running for years to come and keeps your days running smoothly, so you can focus on what’s most important to you.